This statistics represents the total amount of unicast and broadcast IP data transfered
between AirOS powered device and PPPoE server through the
PPP
tunnel either way.
As long as there is some network traffic being passed through the
PPP
tunnel,
Received and Transmitted Bytes, Packets and Errors (if any) value will go on
increasing.
Refer to the
Network
section for more information aboutPPPoEsetup.
WLAN Errors Statistics
WLAN Errors: section displays the counters of 802.11 specific errors which were
registered on
wireless
interface:
Rx invalid NWID value represents the number of packets received with a
different NWID or ESSID - packets which were destined for another access
point. It can help to detect configuration problems or identify the adjacent
wireless network existence on the same frequency.
Rx Invalid Crypt value represents the number of transmitted and received
packets which were encrypted with the wrong encryption key and filed the
decryption routines. It can be used to detect invalid
wireless security
settings.
Rx Invalid Frag value represents the number of packets missed during
transmission and reception. These packets were dropped due to re-assembling
failure as some link layer fragments of the packet were lost
Tx Excessive Retries value represents the number of packets which failed to
be delivered to the destination. Undelivered packet are retransmitted a number
of times before an error occurs.
Missed beacons value represents the number beacons (management packets
sent at regular intervals by the Access Point) which were missed by the client.
This indicates that the client is out of range.
Other errors value represents the total number of transmitted and received
packets that were lost or discarded for other reasons.
The content of the
Main
page can be updated by using the Refresh button.
Extra info
Extra Info: displays the current device usage statistics and status of the system
components in pop-up window:
Status of the Associated Stations
