SCION xA 2006 - SECURITY WITH RKE (V3)
Procedure
Page 15 of 22 pages
Issue: C 05/24/05
DIO
(4) Attach the key tag supplied in the kit to
the remote control's ring. (Fig. 9-2)
10. Completing the Installation.
(a) Complete the reassembly of the vehicle.
(1) Reconnect any disconnected connectors.
(2) Verify the panels fit together properly
with no uneven gaps between them.
(b) Clean up and remove any trash.
(c) Reconnect the vehicle's negative battery
cable. (Fig. 10-1)
(1) Position the negative terminal to the
battery as shown (~45 deg.).
(2) Tighten the nut to 4.1 N-m (36 lbf-in).
(3) Do not touch the positive terminal with
any tool when replacing the cable.
(d) Reset the power windows.
(1) Turn the ignition key to "ON."
(2) Press the power button of each door to
lower the windows halfway.
(3) Press the buttons until the windows close,
and then hold the switches up for one (1)
additional second (minimum.)
(e) Reset the power moon roof (if equipped).
(1) Press and hold the moon roof button until
the moon roof closes. Hold for an
additional two (2) seconds.
(f) Place the owner's manual and warranty card
(left in their protective bags) in the glove
box.
Fig. 10-1
egative
Battery
Cable
Battery
Torque Wrench, 10mm Socket
45 deg.
Fig. 9-2
Key
Ring
Remote Control
Key Tag
