Produtos da Marca Dell

Back to Contents Page

 I/O Panel

Dell™StudioXPS™9100ServiceManual

Removing the I/O Panel

Replacing the I/O Panel



Removing the I/O Panel



1. Follow the instructions in Before You Begin.



2. Remove the computer cover (see Removing the Computer Cover).



3. Remove the front bezel (see Removing the Front Bezel).



4. Remove the top cover (see Removing the Top Cover).



5. Remove the two screws that secure the I/O panel to the top cover.



6. Carefully remove the I/O panel from the top cover.

Replacing the I/O Panel



1. Follow the instructions in Before You Begin.



2. Align the screw holes on the I/O panel with the screw holes on the top cover.



3. Replace the two screws that secure the I/O panel to the top cover.



4. Replace the top cover (see Replacing the Top Cover).



5. Replace the front bezel (see Replacing the Front Bezel).

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

WARNING: Do not operate your computer with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)

removed.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

NOTE: Make note of the routing of all cables as you remove them so that you can re-route them correctly when installing the new I/O panel.

screws (2)

I/O panel

top cover