Produtos da Marca Dell

Back to Contents Page

 Top Cover

Dell™StudioXPS™9100ServiceManual

Removing the Top Cover

Replacing the Top Cover



Removing the Top Cover



1. Follow the instructions in Before You Begin.



2. Remove the computer cover (see Removing the Computer Cover).



3. Remove the front bezel (see Removing the Front Bezel).



4. Remove the two screws that secure the top cover to the computer.



5. Disconnect the cables connected to the I/O panel.



6. While pulling the release tab, slide and pull the top cover away from the chassis.



7. Disconnect the power button cable from the connector on the power button module.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

WARNING: Do not operate your computer with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)

removed.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

I/O panel

screws (2)

top cover