4. Connect the chassis fan cable to the system board connector SYS_FAN1 (see System Board Components).
5. Replace the computer cover (see Replacing the Computer Cover).
Processor Fan and Heat Sink Assembly
Removing the Processor Fan and Heat Sink Assembly
1. Follow the instructions in Before You Begin.
2. Remove the computer cover (see Removing the Computer Cover).
3. Disconnect the processor fan cable from the system board connector CPU_FAN1 (see System Board Components).
4. Rotate the lever counter-clockwise.
5. Pull and lift the clamp away from the tabs on either side of the heat sink assembly.
6. Lift the processor fan and heat sink assembly out of the computer.
Replacing the Processor Fan and Heat Sink Assembly
1. Follow the instructions in Before You Begin
2. Clean the thermal grease from the bottom of the heat sink.
WARNING: Despite having a plastic shield, the processor fan and heat sink assembly may be very hot during normal operation. Ensure that it has
had sufficient time to cool before you touch it.
CAUTION: Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate thermal bonding, which is a
requirement for optimal processor operation.
