Produtos da Marca Dell

Back to Contents Page

 Fans

Dell™StudioXPS™7100ServiceManual

Chassis Fan

Processor Fan and Heat Sink Assembly



Chassis Fan



Removing the Chassis Fan



1. Follow the instructions in Before You Begin.



2. Remove the computer cover (see Removing the Computer Cover).



3. Disconnect the chassis fan cable from the system board connector SYS_FAN1 (see System Board Components).



4. Remove the four screws that secure the chassis fan to the chassis.



5. Slide and lift the chassis fan away from the computer as shown in the illustration.



Replacing the Chassis Fan



1. Follow the instructions in Before You Begin.



2. Align the screw holes on the chassis fan with the screw holes on the chassis.



3. Replace the four screws that secure the chassis fan to the chassis.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

WARNING: Do not operate your computer with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)

removed.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

CAUTION: Do not touch the fan blades when you are removing the chassis fan, as this could damage the fan.

screws (4)

chassis fan