2. If the Hot Keypad feature has been turned off, you must first lift the handset or
press SPK before you begin dialing.
AUTO CAMP-ON
When you want to automatically camp on to a busy station without pressing the
camp on button every time you call a busy station,you can set your phone for auto
camp-on.
• With the handset on-hook, press TRSF and then dial 110.
• Dial 081 to turn on auto camp-on or 080 to turn it off.
• Press TRSF to store your selection.
CALLING YOUR SYSTEM OPERATOR
• Dial 0 to call your system operator or group of operators.
• If you want to call a specific operator, dial that person’s extension number.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press SPK before you begin dialing.
15
500_DCS_Screen.qxp 12/2/2005 9:43 AM Page 21
16
CALL PROCESSING
SYSTEM HOLD
• When you are connected to any call, press HOLD. The call will flash green at
your keyset. If this call appears on a line key at other keysets, it will flash red at
those keysets.
• To take the caller off hold, press that key and the green flashing light will go
steady green again. Resume the conversation.
NOTE: While on a call, pressing a line key, route key or flashing CALL button will
automatically put your first call on hold and connect you to the new call. S
ee
Automatic Hold under Customizing Your Keyset.
EXCLUSIVE HOLD
To place an outside call on hold at your phone so that other users cannot get it:
• Press the HOLD button twice. The call will flash green on your keyset and this
line will show a steady red light on other keysets.
• To retrieve the call,press the flashing green line button or press the HOLD but-
ton a third time.
NOTE: Intercom calls will always be placed on exclusive hold.
REMOTE HOLD
When you wish to place a call on hold at another station.Press TRSF and dial the sta-
tion number (or press the appropriate DSS key). Press the HOLD key. This will place
the call on system hold on an available CALL button or Line Key at the remote sta-
tion and return you to dial tone.
NOTES:
1. If the destination station does not have any free CALL buttons or line keys you
will hear No More Calls tone and must return to the other party by pressing the
TRSF key (or the RETURN soft key on a display keyset).
2. Intercom calls cannot be remote held.
500_DCS_Screen.qxp 12/2/2005 9:43 AM Page 22
