conforming to the specifications in the table below, please properly adjust the wheels.
Item Parameter
Model SQR7130S21 SQR7110S21
Front Camber
Angle
0.87°±50′ 0.87°±50′
Kingpin Caster
Angle
3.4°±30′ 3.4°±30′
Kingpin
Inclination
12.7° 12.7°
Front
Wheel
Front Wheel
Toe-In
(1±3)mm (1±3)mm
Rear Camber
Angle
0°±30′ 0°±30′
Rear
Wheel
Rear Wheel
Toe-In
0°±10′ 0°±10′
Sideslip ≤ 3m/km ≤ 3m/km
26. Lamp Check
26.1. Position Lamp:
Shift the headlamp switch on the instrument panel to the 1
st
gear position, i.e., the clearance
lamp position. In this case, the front and rear position lamps, and number plate lamp are turned
on at the same time. And, after the clearance lamp turns on, all nightlights of instrument, audio,
air conditioner, switch and etc light; and the interior backlight can be adjusted by manipulating
the nightlight regulating switch.
26.2. Low beam lamp:
After the clearance lamp turns on, if the low beam lamp switch turns on, the low beam lamp
shall light;
26.3. High beam lamp:
If the high beam lamp switch turns on, the high beam lamp shall light, and the instrument shall
display the symbol of high beam lamp at the same time;
Fog lamp:
The front fog lamp can turns on only after the clearance lamp turns on, and the rear fog lamp
can turns on only after the front fog lamp turns on;
26.4. Turn signal lamp:
A. In case that the left turn signal lamp turns on, all the left front/left/left rear turn signal
lamps shall light at the same time;
B. In case that the right turn signal lamp turns on, all the right front/right/right rear turn signal
lamps shall light at the same time;
26.5. Hazard waring light:
In case that the warning light switch turns on, six turn signal lamps shall light at the same time,
and the warning light switch flashes, the left and right turn signal indicator lights on the
