air cleaner and then replace the element, and then reinstall the air cleaner after the replacement of
the element.
Engine oil filter
Fully drain out the engine oil, and then remove and replace the filter with a special oil filter spanner.
To ensure the sealing effect, it is best to appropriately apply a little of engine oil on the screwed end
of the new oil filter, and then reinstall it.
Fuel filter
Remove the bolts as shown in the figure below, take off the clamp from the gasoline filter, and then
remove the oil pipe joints from the both extremes, install a new gasoline filter in the reverse order.
25. Four-Wheel Alignment Check
Please refer to Service Manual For Chassis, and check the four-wheel alignment parameters with a
four-wheel alignment machine according to the parameters listed in the table below. If not
Oil Pipe Joint
Clamp
