II. Overhaul of Compressor
Inside of the compressor are assembled with highly machined fine parts, in case abnormal noise or
internal failure is found, replace the assembly.
III. Installation procedure
For the installation order, please refer to the disassembly order, and then follow the order adverse
to that for disassembly to install. It should be noted that, when installing the A/C pipeline joint on
the compressor, be sure to replace with a new gasket and tight the joint at specified torque to avoid
leak.
Chapter Seven Disassembly of Generator
I. Disassembly Procedure
1. Use a 10# sleeve to remove the connecting line of
battery.
2. Use a 10# sleeve to loosen the fixing bolt of generator
adjusting bracket, and then take off the adjusting bracket.
Torque: 30+5Nm.
Before disassembling the
generator, remove the connecting
line of battery first.
