Manually Configuring your Modem-Router
Manually Configuring your Modem-Router
The IP address of the Modem-Router.
The subnet mask of the Modem-Router.
To dynamically assign an IP address to client PCs,
enable the DHCP (Dynamic Host Configuration
If you wish you can Specify the Name of your
Specify the length of time that the DHCP will
assign an IP address to a computer for.
Specify the start IP address of the DHCP pool. Do
not include the gateway address of the Modem-
Router in the client address pool. (See “TCP/IP
Configuration”). If you attempt to include the
Modem-Router gateway address (10.1.1.1 by
default) in the DHCP pool, an error dialog box
will appear. If you change the pool range, make
sure the first three octets match the gateway’s IP
address, i.e., 10.1.1.xxx.
Specify the end IP address of the DHCP pool.
If your network uses a domain name, enter it here.
Otherwise, leave this field blank.
Router. Check the FIX box
to have the IP address and
so that the IP address will
always be assigned as it is
From this section you can configure the Virtual Server, and Special
Application features that provide control over the TCP/ UDP port
openings in the Modem-Router’s firewall. This section can be used to
support several Internet based applications such as web, email, FTP,
public IP addresses to be
shared by multiple internal
