Manually Configuring your Modem-Router
Manually Configuring your Modem-Router
display the following page
and add a new static route
Displays the number of the route.
Enter the IP address of the remote computer for
which to set a static route.
Enter the subnet mask of the remote network for
which to set a static route.
Enter the WAN IP address of the gateway to the
Globally enables or disables RIP.
If Auto summary is disabled, then RIP packets will
include sub-network information from all sub¬net
works connected to the ADSL Modem-Router.
If enabled, this sub-network information will be
summarized to one piece of information covering
The WAN interface to be configured.
Disable: RIP disabled on this interface.
Enable: RIP enabled on this interface.
Silent: Listens for route broadcasts and updates
its route table. It does not participate in sending
Sets the RIP version to use on this interface.
A method for preventing loops that would cause
endless retransmission of data traffic.
