Dil ID: 12
Dil Adı: portugal
Dil Kodu: pt4tayfun Produtos da Marca Audiovox
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



Proposal Number PSDF #P09-0004
in looms as a single harness. Heat resistant convoluted loom shall be used. Only solderless, insulated crimp
automotive electrical connectors shall be used.
CAB ICC MARKER LIGHTING
Five (5) amber Whelen OS Series LED cab face mounted clearance lights shall be supplied, mounted above
the windshield. These lights are to be mounted in a chrome flange.
Two (2) amber Whelen OS Series LED side clearance lights shall be supplied, one (1) each side mounted
ahead of the front door. These lights are to be mounted in a chrome flange.
An amber diamond shaped reflector shall be mounted on the lower corner of each cab front door adjacent to
the door hinge.
APPARATUS ICC MARKER LIGHTING
Two (2) amber Whelen OS Series LED side clearance lights shall be supplied, one (1) each side mounted
ahead of the forward body compartment. These lights are to be mounted in a chrome flange.
Five (5) red LED clearance lights shall be supplied, mounted in the rear of the apparatus.
Two (2) red LED clearance lights shall be supplied, mounted facing the side of the apparatus.
ICC lighting utilized and lighting positions shall be in conformance with FMVSS 108.
SIDE MOUNTED TURN SIGNAL LIGHTS
Two (2) Whelen, model RSA02ZCR, linear amber LED turn signal lights shall be provided mounted one
each side in the front wheel well area. The lights shall be mounted in a chrome flange.
REAR STOP/TAIL/TURN/BACKUP LIGHTS
The rear of the apparatus shall be equipped with Federal Signal QuadraFlare 6"x4" lights. The top light in
the assembly shall be a red LED stop/tail light, Federal Signal model QL64Z-BTT. The middle light set
shall be an amber LED lamp with a populated arrow shape, Federal Signal model QL64Z-ARROW and the
lower lights shall be clear LED backup lights, Federal Signal model QL64Z-BACKUP.
A one-piece polished aluminum trim casting shall be mounted around the rear stop/tail/turn and backup lights
on each side of the apparatus.
BACK-UP ALARM
A solid state electronic backup alarm shall be installed on the rear of the apparatus and wired to the backup
light circuit.
One (1) license plate mounting bracket and incandescent light shall be provided. The light and bracket shall
be located on the rear of the apparatus.
Page 155