Prestige 643 ADSL Router

Call Scheduling 14-3

FIELD DESCRIPTION EXAMPLE

Start Time Enter the start time that you wish the schedule set to take effect in

hour : minute format.

Duration Enter the maximum duration allowed in hour : minute format for this

scheduled connection.

Action Choose an action. Choices are:

Forced On means that the connection is maintained whether or not

there is a demand call on the line and will persist for the time period

specified in the Duration field.

Forced Down means that the connection is blocked whether or not

there is a demand call on the line.

Enable Dial-On-Demand means that this schedule permits a demand

call on the line.

Disable Dial-On-Demand means that this schedule prevents a

demand call on the line.

Forced On

Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11

from the main menu and then enter the target remote node index. Using the [SPACE BAR], change the

Encapsulation field to PPPoE to make the Schedule Sets field available as shown next.

Figure 14-3 Applying Schedule Set(s) to A Remote Node

You can apply up to 4 schedule sets, separated by commas, for one remote node. Change the schedule set

numbers to your preference(s).

Menu 11.1 - Remote Node Profile

Rem Node Name= ChangeMe

Active= Yes

Encapsulation= PPPoE

Multiplexing= LLC-based

Incoming:

Rem Login=

Rem Password= ********

Outgoing:

My Login=

My Password= ********

Authen= CHAP/PAP

Route= IP

Bridge= No

Edit PPP Options= No

Rem IP Addr= 0.0.0.0

Edit IP/IPX/Bridge= No

Session Options:

Edit Filter Sets= No

PPPoE Idle Timeout(sec)= 0

PPPoE Service Name=

Schedule Sets=

Press ENTER to Confirm or ESC to Cancel: