Chapter 8 The VPN Transport Screens
User’s Guide
92
8.5 Statistics
Click ADVANCED > VPN Transport > Statistics to view details and performance
information of each active customer interface and its associated Ethernet pseudowire.
Figure 49 ADVANCED > VPN Transport > Statistics
The following table describes the labels in this screen.
Egress Enter the egress label number for this pseudowire. This must be the
ingress label of the peer device. This should not be the egress label
number of any other Ethernet pseudowire configured on the WiMAX
Modem.
Pseudowire Description Enter a brief (up to 31 characters) description for this pseudowire.
Apply Click to save your changes.
Cancel Click to return to the previous screen without saving your changes.
Table 31 ADVANCED > VPN Transport > Ethernet Pseudowire Setup (continued)
LABEL DESCRIPTION
Table 32 ADVANCED > VPN Transport > Statistics
LABEL DESCRIPTION
# The number of the item in this list.
Active This icon is green if the associated interface is enabled. The icon is grey if
the associated interface is disabled. Enable or disable an interface by
clicking its Edit icon.
Total Packets This displays the number of packets received (Receive) and sent
(Transmit) on the customer interface since the interface was activated, or
the Clear button pressed.
Total Bytes This displays the number of bytes received (Receive) and sent (Transmit)
on the customer interface since the interface was activated, or the Clear
button pressed.
Interface Description This is the brief name or description of the customer interface configured in
the ADVANCED > VPN Transport > Customer Interface Setup screen.
