9. Close the Browser. You will have to change your Host IP to match the Host IP
address just entered in the TIP/IP Configuration
10. Re-open the Browser. Call out the new IQ LAN address. You should now see all of
the updated information.
Note: Once you have changed the Host IP in the IQ LAN, the host IP must match. If
they do not then you will not be able to view the TCP/IP configuration
information.
Update IQ panel firmware – Reference IQ-Series Downloader Installation Instructions Technical
Bulletin (P/N: 39-10050-001).
IQ-400 Installation Manual Page 98 of 100 33-10057-001-A
