SCION tC 2007 SUPERCHARGER
Procedure
Page 7 of 36
Issue A: 04/10/07
4. Intake & Wiring System.
(a) Remove factory Air Intake Tube and Air
Cleaner Cap Sub-Assembly including Air
Filter Element. See Fig 11. Temporarily cover
throttle body intake with a shop rag and/or duct
tape.
(b)
Remove factory lower airbox. You will need to
disconnect the engine wire from the airbox
lower before removing. See Fig. 12. NOTE:
Remove and save the 3 mounting fasteners.
They will be re-used to mount the new TRD-
supplied lower airbox. Remove fender intake
tube as shown in Fig 13. The fender intake
tube will NOT be reused.
Fi
. 11
Fi
. 12
10 m
Fi
. 13
Philips Screwdriver
