Article No. 01-6-2 Cont’d.
PATS DIAGNOSTIC (Continued)
System Types A
Action and D System Type B System Type C System Type E
How To Add Extra Cannot be done. See 1) Use an 1) Use an 1) Use an
Keys Using The “What to do if ALL unprogrammed PATS unprogrammed PATS unprogrammed PATS
Service Card KEYS are lost” key in the ignition. key in the ignition. key in the ignition.
procedure in this
2) Service Card V5.0 2) Service Card V5.0 2) Service Card V5.0
TSB.
or higher. or higher. or higher.
Select: Select: Select:
a) Service Bay a) Service Bay a) Service Bay
Functions Functions Functions
b) PATS b) PATS b) PCM
c) Enter Security c) Enter Security
c) Enter Security
Access (10 minute Access (10 minute
Access (10 minute
delay) delay)
delay)
d) Ignition Key Code d) Ignition Key Code
d) Ignition Key Code
Program Select Program Select
Program Select
Cancel once to return Cancel once to return
Cancel once to return
to menu selections to menu selections
to menu selections
e) If another key is to e) If another key is to
e) If another key is to
be programmed, be programmed,
be programmed,
insert new key in the insert new key in the
insert new key in the
ignition, and turn the ignition, and turn the
ignition, and turn the
ignition to RUN with ignition. When
ignition to RUN with
the new key. Proceed changing keys, swap
the new key. Proceed
with Step (d) above. the keys quickly, and
with Step (d) above
turn the ignition to
3) Disconnect DLC.
RUN with the new
3) Disconnect DLC.
Wait 10 seconds
key. The total key off
Wait 10 seconds
before continuing to
time must be less
before continuing to
the next step.
than 10 seconds.
the next step.
Proceed with Step (d)
4) Cycle new key in
4) Cycle new key in above.
ignition to RUN and
ignition to RUN and
confirm vehicle starts.
3) Disconnect DLC.
confirm vehicle starts.
Wait 10 seconds
before continuing to
the next step.
4) Cycle new key in
ignition to RUN and
confirm vehicle starts.
PAGE 14
