Article No. 01-6-2 Cont’d.
System Types A
Action and D System Type B System Type C System Type E
Access (10 minute Access (10 minute Access (10 minute
delay) delay) delay)
d) Parameter Reset d) Parameter Reset d) Ignition Key Code
(DO NOT perform (DO NOT perform Erase (DO NOT
any other selections) any other selections) perform any other
selections)
3) Turn ignition OFF 3) Turn ignition OFF 3) Turn ignition OFF
and disconnect DLC. and disconnect DLC. and disconnect DLC.
4) Cycle ignition 4) Cycle ignition 4) Cycle Key 1 in
from OFF to RUN 5 from OFF to RUN 5 ignition to RUN for 2
times, each time times, each time seconds minimum.
leaving the ignition in leaving the ignition in
5) Cycle Key 2 in
RUN for at least 3 RUN for at least 3
ignition to RUN.
seconds, and OFF seconds, and OFF
for at least 2 for at least 2
6) Attempt to start
seconds. This seconds. This
vehicle.
initializes the initializes the
PCM/PATS and now PCM/PATS and now 7) Program additional
PID PCM_ID = PID PCM_ID = keys using Spare
STORED. Theft STORED. Theft Key Programming
indicator should indicator should Procedure.
prove-out for 3 prove-out for 3
seconds and vehicle seconds and vehicle
will start. will start.
PAGE 13
