Dil ID: 8
Dil Adı: italy
Dil Kodu: it3tayfun Prodotti del Marchio Liebherr
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



16
Changing over door hinges GGPv 65.. / BGPv 84..
Doorhingesshouldonlybechangedbyatrainedexpert.
Changing the door hinges must be done by two people.
6. Removethehingecomponentsfromthehingebracket.
1. Open door by about 90°.
Important note
The door must be opened 9
before the lower hinge bracket
is removed.
This will hold the self-closing
mechanism that is integrated into
the door in the required position for
installation.
WARNING!
If the door is removed and reinstalled in the
closed position, this will lead to destruction of
the self-closing mechanism on the rst open-
ing of the door.
Important
As a result of its heavy weight, the door
must be held secure by one person.
2. Removehingebracket.
Pull the door out at the
bottom and lift off.
Bearing ring
Brass washer
Hinge bushing
Plastic washer
Note on point 6
The hinge bushing with brass washer and bear-
ingringmaystickinthedoormountingwhen
youpulloutthehingebracketand,inthiscase,
must be removed from it.
5. Remove bearing ring from
upper door mounting.
3. Unscrew base mounting
bracket.
4. Re-fit base mounting bracket on the
opposite side.