Prodotti del Marchio Liebherr

Electrical connection

Only operate the appliance with alternating current (AC).

The permissible voltage and frequency are indicated on the

type plate. The position of the type plate is shown in the section

entitled Description of the appliance.

Thesocketmustbeproperlyearthedandprotectedbyafuse.

The tripping current of the fuse must be between 10 A and 16 A.

Thesocketmustnotbesituatedbehindtheappli-

ance and must be easily accessible.

Donotconnecttheapplianceusinganexten-

sioncableorextensionsocket.

Donotusestand-aloneinverters(conversion

of direct current to alternating/three-phase

current)orenergy-savingplugs.Riskofdam-

agetotheelectroniccontrolsystem!

GGPv 14.. equipment

Intermediate shelves

Place the supplied intermediate shelves onto the shelf rails.

Note

The maximum load per intermediate shelf is 20 kg.

Fit the supplied shelf rails to the right

and left of the vertical bar.

Suspend the rails at the desired

height, by inserting into the rear

clip-instriprstandthenclippingin

at the front.

Safety lock

Thelockisequippedwithasafety

mechanism.

Locking the appliance

• Insert the key as shown by ar-

row 1.

• Turnthekey180°(2).

Tounlocktheappliance,thesame

procedure must be repeated in the

same order.

Insertthegridshelves.

Equipment

GGPv

65..

GGPv

14..

The BGPv series is equipped

with L-shaped support rails to

accommodatebakingtrays.

Depending on the height of

the goods to be stored, you

can adjust the position of the

support rails in intervals of

27,5 mm.

First slide bars into the rear

clip-in upright at the desired

height and then hang in posi-

tion at the front.

BGPv equipment