13
Home > Wireless > 802.11a
Using the Configuration Menu
Wireless Settings- choose 802.11a or 802.11b+. Here, 802.11a is selected.
Hexadecimal digits consist of the numbers 0-9 and the letters A-F
ASCII (American Standard Code for Information Interchange) is a code for
representing English letters as numbers from 0-127
WEP (Wired Equivalent Privacy)
Provides security by encrypting data during transmission
Apply-
click Apply to save the changes.
Keys 1-4-
input up to 4 WEP keys; select the one you wish to use.
Key Type-
select HEX or ASCII
WEP Encryption-
select the level of encryption desired: 64, 128 or 152-bit
Turbo Mode-
select ON or OFF. (Note: If you enable Turbo mode on the
DI-754 make sure to also enable encryption on all 802.11a
wireless clients or wireless connection will not be established.)
SSID-
by default the SSID is set to default. All devices on the net-
work must share the same SSID. If you change the default
setting, the SSID may be up to 32 characters long.
Channel-
52 is the default channel for 802.11a. All devices on the net-
work must share the same channel. Note: Wireless adapters
will automatically scan and match the channel of the Access
Point.
WEP-
select Enabled or Disabled. Disabled is the default setting.
(Note: If you enable encryption on the DI-754 make sure to also
enable encryption on all 802.11a wireless clients or wireless
connection will not be established.)
