10
With a single IP Address from your Broadband Internet Service provider you
can share the Internet with all the computers on your local network, without
sacrificing speed or security, using D-Link DI-754 Wireless Router.
Getting Started
An Infrastructure wireless network contains an Access Point. (Note: The
DI-754 has a built-in 802.11a Access Point.) The Infrastructure Network
example, shown here, contains the following D-Link network devices:
A wireless Router - D-Link AirPro DI-754
A laptop computer with a wireless adapter - D-Link AirPro DWL-A650 or
AirPlus DWL-650+
A desktop computer with a wireless adapter - D-Link AirPro DWL-A520 or
AirPlus DWL-520+
A Cable modem - D-Link DCM-200
If you need to assign IP Addresses to the computers on the network,
please remember that the IP Address for each computer must be in
the same IP Address range as all the computers in the network, and
the Subnet mask must be exactly the same for all the computers in the
network.
For example: If the first computer is assigned an IP Address of
192.168.0.2 with a Subnet Mask of 255.255.255.0, then the second
computer can be assigned an IP Address of 192.168.0.3 with a Subnet
Mask of 255.255.255.0, etc.
IMPORTANT: If computers or other devices are assigned the same
IP Address, one or more of the devices may not be visible on the
network.
IP ADDRESS
Note: If you are using a DHCP-capable router in your network setup,
such as the DI-754, you will not need to assign a static IP Address.
Right out of the box, with its default settings, the DI-754 will
connect with other D-Link AirPro products.
Note: to utilize the 802.11b connection to your network, please
install the D-Link DWL-650+ into the slot on the back of the DI-
754. Please make sure that the DWL-650+ is fully inserted into
the slot. (See the Quick Installation Guide for the DWL-650+.)
