36
EN
left on the flters. If there are food
resdues on flters, take them out and
clean well under runnng water.
1. Turn the mcro flter (1) and
coarse flter (2) assembly counter
clockwse and pull t out from ts
seatng (A).
2. Pull out the metal / plastic filter
(3) (B).
3. Press the two pawls on the coarse
flter nwards and separate the
coarse flter from the assembly
(C).
4. Clean all three flters under tap
water by means of a brush.
6
Mantenance and cleanng
Servce lfe of the product extends
and frequently faced problems
decrease f t s cleaned at regular
ntervals.
A Unplug the product and turn off
the tap before attemptng any
cleanng procedures.
C Do not use abrasve substances
for cleanng.
C Clean the flters and mpellers at
least once a week.
Cleanng the outer surface
of the product
Clean the outer surface and door
gaskets of the product gently wth a
mld cleanng materal and damp cloth.
Wpe the control panel only wth a
damp cloth.
Cleanng the nteror of the
machne
— Clean the nteror of the machne
and the tank by runnng a prewash
programme wthout detergent or
a long washng programme wth
detergent based on the degree of
solng.
— If water has remaned n the
machne, dran the water by
performng the procedures
under the topc “Cancelng a
programme”. If the water cannot
be dscharged, clean any leftover
deposts that have pled up n the
bottom of the machne, blockng
the water path.
Cleanng the flters
Clean the flters at least once a week
n order for the machne operates
ecently. Check f food resdues are
