40
o IMPORTANT: Do not insert the drain hose too deeply into the
water pipe, as this may cause siphoning.
o NEVER EXTEND THE DRAINAGE HOSE FROM ITS ORIGINAL
LENGTH.
o For the washer dryer to function properly, the end of the
discharge hose must be at a minimum of 50 cm and a maximum
of 85 cm from the ground.
Power supply
o IMPORTANT: As your appliance is a built in product, the
electrical socket must still be accessible once the
appliance is installed.
o Consult the rating plate, located on the inner rim of the porthole
door of the appliance BEFORE making the electrical connections.
Ensure that the voltage reaching the plug is the same as that on
the rating plate.
o DO NOT REMOVE THE RATING PLATE AS THE
INFORMATION ON IT IS IMPORTANT.
o The moulded plug that is supplied with the appliance must be
placed into an earthed and insulated socket.
o Broken or damaged power leads must only be replaced by a
suitably qualified person. A power lead of a similar type must be
used in replacement.
o Power lead type – H 0 V V – F 3G 1,5.
o IMPORTANT: We do not recommend that this appliance is
connected to an extension lead.
