37
IMPORTANT: When the washer dryer is positioned in the location
where it will be used. Make sure that all four feet are resting firmly on
the floor, by pressing down on each corner and checking that the
appliance stands still.
Fitting the décor door
o The front of the appliance has been drilled to accommodate the
hinges to enable the door to be opened from the left or right
hand side.
o The following instructions demonstrate how to fit a standard
height décor door with dummy drawer.
o You will need these
screws to complete
the fitting.
o Screw the hinges onto the décor door (A) then fasten the
dummy drawer front to the top edge of the door. Ensure that the
gap between the door and drawer front matches the units on
either side.
o Fasten the magnetic catch (B) using screw (C) to the décor
door.
