© 2011 American Honda Motor Co., Inc. – All Rights Reserved. BII 45424 (1103) 3 of 4
Installing the Rear Splash Guards
6. Remove the three self-tapping screws from the left
rear inner fender.
7. Secure the left bracket on the left rear inner fender
with two self-tapping screws.
FRONT
SELF-TAPPING
SCREWS
LEFT REAR INNER FENDER
2 SELF-TAPPING
SCREWS
(Reuse.)
LEFT
BRACKET
LEFT REAR
INNER FENDER
The oval hole
goes up.
8. Install a spring nut on the left rear splash guard as
shown.
9. Loosely install the left rear splash guard to the left
rear inner fender with two 5 x 16 mm self-tapping
screws and one self-tapping screw.
LEFT REAR
SPLASH GUARD
SPRING
NUT
LEFT REAR
SPLASH GUARD
SELF-TAPPING
SCREW,
5 x 16 mm
(Install loosely.)
LEFT REAR
INNER FENDER
SELF-TAPPING
SCREW
(Reuse.)
(Install loosely.)
