1.
2.
3.
4.
1
2
5.
6.
7.
2
1
8.
Emergency drain
Because of a malfunction, the appliance cannot drain
the water.
If this occurs, do steps (1) through (8) of 'To clean the
drain pump'.
If necessary, clean the pump.
When you drain the water with the emergency drain
procedure, you must activate again the drain system:
1. Put 2 litres of water in the main wash compart-
ment of the detergent dispenser.
2. Start the programme to drain the water.
Frost precautions
If the appliance is installed in an area where the tem-
perature can be less than 0 °C, remove the remaining
water from the inlet hose and the drain pump.
1. Disconnect the mains plug from the mains socket.
2. Close the water tap.
3. Remove the water inlet hose
16
