Fault code and malfunc-
tion
Possible cause / Solution
BETRIEB
EXTRA SPÜLEN
ENDE
ES
U
AP
/
TRATS
The light of button 6 flash-
es and the light 7.3 illumi-
nates:
Door open
The door has not been closed or is not closed properly.
• Close firmly the door.
The appliance does not start or stops during opera-
tion without any visible alarm.
Before contacting your local Service Centre, please
carry out the checks listed below.
Malfunction Possible cause / Solution
The appliance does not
start:
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
• Replace the fuse.
The programme selector dial is not correctly positioned and the button 6 has
not been pressed.
• Please turn the selector dial and press the button 6 again.
The delay start has been selected.
• If the laundry are to be washed immediately, cancel the delay start.
The appliance fills then
empties immediately:
The end of the drain hose is too low.
• Refer to paragraph in "Water drainage" in chapter "Installation".
The appliance does not
empty and/or does not
spin:
An option or a programme that ends with the water still in the tub or a that
eliminates all the spinning phases has been selected.
• Select the draining or spinning programme.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
24
