The filter is inserted correctly when the indica-
tor on its top is visible and blocked.
• close the filter cover;
• insert the mains plug
again.
Cleaning the water inlet filters
Important! If the appliance doesn't fill, it takes a long
time to fill with water, the starting button flashes red
or the display (if available) shows the relevant alarm
(see chapter "What to do if..." for more details), check
if the water inlet filters are blocked .
To clean the water inlet filters:
• Turn off the water tap.
• Unscrew the hose
from the tap.
• Clean the filter in the
hose with a stiff brush.
• Screw the hose back onto the tap. Make sure
the connection is tight.
• Unscrew the hose
from the appliance.
Keep a towel nearby
because some water
may flow.
• Clean the filter in the
valve with a stiff
brush or with the
piece of cloth.
• Screw the hose back to the appliance and make
sure the connection is tight.
• Turn on the water tap.
What to do if…
The appliance does not start or stops during opera-
tion. Certain problems are due to lack of simple main-
tenance or oversights, which can be solved with the
help of the indications described in the charts, without
calling out an engineer.
During appliance operation it is possible that the red
pilot light of the button 6 flashes and one of the indica-
tor pilot lights illuminates to indicate that the appli-
ance is not working.
Before contacting your local Service Centre, please
carry out the checks listed below.
22
