Produits de la Marque Whirlpool

Refined Salt and Rinse Aid

(°dH=hardnessmeasuredinGermandegrees-°f=hardness

measuredinFrenchdegrees–mmol/l=millimolesperlitre)

Measuring out the rinse aid

Rinse aid makes dishDRYING easier. The rinse aiddispenser

shouldbefilled:

• WhentheLOWRINSEAIDindicatorlightonthepanel/display

is lit;

• When the dark optical indicator on the dispenser door “E”

becomes transparent.

1. Open the dispenser by turning the

cap "G" in an anticlockwise direction.

2. Pour in the rinse aid, making

sure it does not overflow from the

dispenser. If this happens, clean the

spill immediately with a dry cloth.

3. Screw the cap back on.

NEVER pour the rinse aid directly

into the tub.

Adjusting the amount of rinse aid

If you are not completely satisfied with the drying results, you

canadjustthequantityofrinseaidused.Turntheadjuster“F”.

A maximum of 4 levels can be set according to the dishwasher

model. The factory setting is for a medium level.

• Ifyouseebluishstreaksonthedishes,setalownumber(1-2).

• Iftherearedropsofwaterorlimescalemarksonthedishes,

setahighnumber(3-4).

Only use products which have been specifically designed

for dishwashers. Do not use table salt or industrial salt.

(Followtheinstructionsgivenonthepackaging.)

If you are using a multi-function product, we recommend

that you add salt in any case, especially if the water is hard or

very hard.

(Followtheinstructionsgivenonthepackaging.)

If you do not add salt or rinse aid, the LOW SALT and LOW

RINSE AID indicator lights will remain lit.

Measuring out the refined salt

TheuseofsaltpreventstheformationofLIMESCALEonthedishes

and on the machine's functional components.

•Itisimportantthatthesaltdispenserbeneverempty.

•Itisimportanttosetthewaterhardness.

The salt dispenser is located in the lower part of the dishwasher

(seeDescription)

andshouldbefilled:

• WhentheLOWSALTindicatorlightinthecontrolpanelislit;

• Seeautonomyinthewaterhardnesstable.

1. Remove the lower rack and unscrew the

containercap(anticlockwise).

2.Onlythefirsttimeyoudothis:fillthewater

dispenser up to the edge.

3. Position the funnel

(seefigure)

and fill the salt

containerrightuptoitsedge(approximately1

kg);itisnotunusualforalittlewatertoleakout.

4. Remove the funnel and wipe any salt residue away from the

opening; rinse the cap under running water and then screw it on.

It is advisable to perform this procedure every time you add salt

to the container.

Makesurethecapisscrewedontightly,sothatnodetergentcan

getintothecontainerduringthewashcycle(thiscoulddamage

thewatersoftenerbeyondrepair).

Whenever you need to add salt, we recommend carrying out

the procedure before the washing cycle is started.

Setting the water hardness

For perfect water softener operation, it is essential that the

adjustmentbebasedonthewaterhardnessinyourhouse.Ask

your local water supplier for this information. The factory setting is

for medium water hardness.

•SwitchthedishwasheronusingtheOn/Offbutton.

•SwitchitoffusingtheOn/Offbutton

•HolddownbuttonStart/Pause for 5 seconds until you hear

a beep.

•SwitchitonusingtheOn/Offbutton

•Thedisplayshowsthecurrentselectionlevelnumberandthe

salt indicator light.

•PressbuttonP to select the desired hardness level

(seehardness

table).

•SwitchitoffusingtheOn/Offbutton

•Settingiscomplete!

Water Hardness Table

Average autonomy

salt dispenser with 1

wash cycle per day

level °dH °fH mmol/l months

1 0-6 0-10 0-1 7months

2 6-11 11-20 1.1-2 5months

3 12-17 21-30 2.1-3 3months

4 17-34 31-60 3.1-6 2months

5 34-50 61-90 6.1-9 2/3weeks

Forvaluesbetween0°fand10°f,wedonotrecommendthe

useofsalt.Asettingof5mayincreasecycleduration.(°dH

=hardnessmeasuredinGermandegrees-°f=hardness

measuredinFrenchdegrees–mmol/l=millimolesperlitre)