Produits de la Marque Whirlpool

Advice regarding the first wash cycle

After the installation, remove the stoppers from the racks and

the retaining elastic elements from the upper rack

(ifany).

Water softener settings

Before starting the first wash cycle, set the hardness level

of the water from the mains supply.

(seechapter Rinse aid

andrefinedsalt).

Firstloadthesoftenertankwithwater,thenintroduceabout1

kg of salt. It is perfectly normal for water to flow out.

As soon as this procedure is complete, run a wash cycle.

Only use salt that has been specifically designed for dish-

washers.

After the salt has been poured into the machine, the LOW

SALT indicator light switches off.

If the salt container is not filled, the water softener and the

heating element may be damaged as a result.

Technical data

Dimensions

width45cm

height85cm

depth60cm

Capacity 10standardplace-settings

Water supply pressure

0,05÷1MPa(0.5÷10bar)

7,25psi–145psi

Power supply voltage Seeappliancedataplate

Total absorbed power Seeappliancedataplate

Fuse Seeappliancedataplate

Thisdishwasherconformstothe

followingEuropeanCommunity

Directives:

-93/68/EEC(CEMarking)

-2006/95/EC(LowVoltage)

-2004/108/EC(Electromagnetic

Compatibility)

-2009/125/EC(Comm.Reg.

1016/2010)(Ecodesign)

-2010/30/EC(EnergyLabelling)

-2011/65/EC(RoHS)

-2012/19/CE WasteElectrical

andElectronicEquipment(WEEE)

The machine has a buzzer/set of tones to inform the user that

a command has been implemented: power on, cycle end etc.

The symbols/indicator lights/LEDs on the control panel/display

may vary in colour and may have a flashing or fixed light.

The display provides useful information concerning the type

of wash cycle, drying/wash-cycle phase, remaining time,

temperature etc.