16
Using with a Revolabs Solo™ Executive System
The Revolabs Solo™ Desktop Microphone can be paired to a
Revolabs Solo™ Executive Wireless Microphone System for users
who wish to have a single microphone to use in both the office and
in the conference room. This is accomplished by pairing the
Desktop Microphone to the Executive Base Station and docking
the Microphone in the Executive Charger Base. The Microphone
can then be used in either system by placing the Microphone in the
respective Charger for about 5 seconds.
17
Revolabs Solo
™
Desktop System Functions
The following table shows the functions supported by the system:
Function
Charger
Base
LED
Status
Wireless
Microphone
LED Status
Action
Enter Pairing Mode
Off Off
Press the Microphone MUTE button for
about 8 seconds (LED solid RED), and
then press the MUTE button on the
Charger Base for about 7 seconds
(LED solid RED).
Mute / Un-mute
On On
A short press of the Microphone MUTE
button or Charger Base MUTE button
causes flashing RED LED on each unit
indicating that the Microphone has
audio muted. Pressing either MUTE
button again will un-mute Microphone
(flashing GREEN LED on each unit).
Turn Off Microphone
On On
Press and hold the Microphone MUTE
button for about 10 seconds, until the
LED stays solid RED, and then
release.
Or
Dock the Microphone into the Charge
Base for less than 2 seconds.
Turn On Microphone
Off Off
Press and hold the Microphone MUTE
button for about 3 seconds, until the
LED shows solid GREEN.
Or
Dock the Microphone into the Charge
Base for at least 4 seconds.
