~
Take care when handling
processing chemicals (detergents,
softeners, neutralizers, etc.). These may
contain irritant or corrosive ingredients.
Wear protective gloves and goggles.
With all chemical agents the
manufacturer’s safety conditions must
be observed.
~
The lab washer is only designed to
operate with water and the
recommended processing chemicals.
The machine must NOT be operated
with organic solvents or flammable
liquids. This may cause an explosion or
damage to rubber and plastic
components, which in turn allows liquid
substances to leak out.
~
Do not stand, sit or lean on the
opened machine door.
~
Do not touch the heating elements
during or directly after the end of a
program, burns could result. The
elements remain hot for some time after
the end of the program.
~
The water in the machine must not
be used as drinking water.
~
Be careful when sorting items with
sharp, pointed ends. Carefully position
these items in the machine, so that you
will not hurt yourself or create a danger
for other operators.
~
When using this machine regard the
high temperatures and be especially
careful not to scald or burn yourself.
When opening the door bypassing the
electrical lock, a danger of burning,
scalding and corrosion exist. Let mobile
units, inserts and cleaned items cool
before touching them. Any water which
may remain in containers will be very
hot and must be emptied into the wash
cabinet.
~
If toxic chemical substances can
form in the wash water during
processing (e.g. aldehydes in the
disinfection agent), the door seal and, if
applicable, the function of the steam
condensor must be checked regularly.
In that case, opening the lab washer
door during a program interruption can
be dangerous.
~
If you are exposed to toxic vapors or
processing chemicals, consult the
manufacturer's material safety data
sheets for emergency procedures.
~
Always allow mobile units, modules,
inserts, and loads to cool before
removing. Be sure to empty any water
from concave items into the wash
cabinet before removing.
~
After drying with the TA drying unit
open the door to allow the items and
inserts to cool.
IMPORTANT SAFETY INSTRUCTIONS
5
