Water inlet hose with safety valve
After connecting the double-walled water inlet hose, the safety valve is next
to the tap. Therefore the water inlet hose is only under pressure while the
water is running. If the water inlet hose starts to leak during this operation,
the safety valve cuts off the running water.
Please take care when installing the water inlet hose:
- The electrical cable for the safety valve is in the double-walled
water inlet hose. Do not immerse the water inlet hose or the safety
valve in water.
- If water inlet hose or the safety valve is damaged, remove the
mains plug immediately.
- A water inlet hose with safety valve must only be replaced by a
specialist or by the Service Force Centre.
- Place the water inlet hose in such a way that it is never higher than
the bottom edge of the safety valve.
39
Installation instruction
WARNING!
Dangerous voltage
156997 66/0en 23-10-2006 12:04 Pagina 39
