Electrical connection
Information concerning the electrical connection is given on the rating plate
on the edge of the dishwasher’s door.
Before plugging the appliance into the wall socket, make sure that:
1. The mains voltage and current rating at the site of installation
match the nominal voltage and current rating given on the rating
plate.
2. The meter, fuses, mains power supply and wall socket can all take
the maximum load required. Make sure that the socket and plug are
compatible without having to use any type of adaptor. If necessary,
have the domestic wiring system socket replaced.
To isolate the dishwasher from mains, remove the mains plug.
Important!
The plug must still be accessible after the appliance has been installed.
In case that the electrical cable has to be replaced, please contact your
local Service Force Centre.
The appliance should not be connected to the electrical supply by means
of an extension cable.
Safety standards require the appliance to be earthed.
The manufacture accepts no liability for failure to observe the above
safety precautions.
41
Installation instruction
156997 66/0en 23-10-2006 12:04 Pagina 41
