17
WATER HOSE MESH FILTERS
•
Check and clean periodically.
For machines with a straight water supply
hose (see figure)
1.
Turn off the tap.
2.
Unscrew the hose from the tap.
3.
Clean the internal strainer.
4.
Screw the supply hose back onto the tap.
5.
Unscrew the hose from the machine.
6.
Remove the filter from the washing machine
with pliers and clean it.
7.
Replace the filter and screw the hose
connection back on to the machine.
8.
Turn on the tap and
ensure that the
connection is completely water-tight.
For machines with Water Stop hose
(see figure)
1.
Turn off the tap.
2.
Unscrew the hose from the tap.
3.
Clean the strainer.
4.
Screw the Water Stop hose back onto the
tap.
5.
Turn on the tap and
ensure that the
connection is completely water-tight.
FILTER
Check and clean the filter two or three times a
year (see “Removing the Filter”).
The appliance will not switch on or stops in
the middle of the programme
•
Power plug properly inserted in mains
socket?
•
Mains fuse OK?
•
Power failure?
•
Tap turned on? Is water coming through?
•
Door closed?
•
Programme selected?
•
“On/Off” button pressed?
No water or insufficient water supply
•
Tap turned on completely?
•
Kink in water hose?
•
Water hose filter clogged? (See “Care and
Maintenance”).
•
Water hose frozen up?
•
The appliance has a safety hose and the
safety valve has opened (red indicator in the
safety valve inspection window)?
In this case replace it with a new safety hose.
Waste water not pumped out
•
Drain hose installed correctly? (See
“Installation Instructions”).
•
Filter clogged? (See “Removing the Filter”).
•
Drain hose frozen up?
•
Is the rinse hold button pressed?
Detergent and additive product residues in
detergent drawer at end of wash
•
Siphon installed correctly?
•
Siphon clogged?
•
Not enough water delivered? (See above).
•
Also see “Detergent and Additives” and
“Care and Maintenance”.
Machine vibrates during spin cycle
•
Machine perfectly horizontal with all four feet
on ground? (See “Installation Instructions”).
•
Transit bolts removed? The transit bolts must
be removed before the machine is used (see
“Installation Instructions”).
CARE AND MAINTENANCE
Straight hose Water Stop hose
TROUBLESHOOTING GUIDE
