16
WHEN SHOULD I DRAIN RESIDUAL WATER?
•
Before transporting (moving) the machine.
•
If the appliance is installed in a room subject to sub-
zero temperatures. It is best in this case to drain the
machine after every wash.
DRAINING RESIDUAL WATER
The residual water drain hose is located in the
appliance plinth.
Before draining residual water unplug the
machine.
1.
Remove carefully the plinth using the thin rounded
projection of the coloured insert from the detergent
drawer.
2.
Grip the cap and pull it out. Remove the cap from
the end of the tube.
3.
Allow all the water to flow into a flat bowl, then refit
the cap and stow the drain tube back in its
compartment.
4.
Before using the machine again, pour about 1 litre
of water into the detergent dispenser to reactivate
the “Eco System”.
APPLIANCE EXTERIOR AND CONTROL PANEL
•
Clean using normal household cleaner (do not use
abrasive products and no solvents).
•
Dry with a soft cloth.
DETERGENT DISPENSER
1.
Disengage the detergent dispenser by pressing
the release lever in the prewash compartment and
extract it.
2.
Remove the inserts (the siphon from the softener
compartment and the insert for liquid detergents).
3.
Wash all the parts under running water.
4.
Replace the parts and refit the detergent dispenser.
Push the siphon firmly into place.
DOOR SEAL
•
Clean with a damp cloth when necessary.
•
Periodically check the fold of the seal for foreign
objects.
DRAINING RESIDUAL WATER
CARE AND MAINTENANCE
1
2
2
