15
WHEN SHOULD I REMOVE THE FILTER?
Check the filter two or three times a year and
clean it if necessary.
•
Check the filter if the appliance is not draining
properly or if it fails to perform spin cycles.
•
Remove the filter if the pump is blocked by an
object (buttons, coins, safety pins, etc.).
IMPORTANT: make sure the water has had
time to cool before draining the appliance.
REMOVING THE FILTER
1.
Switch off the appliance and unplug it.
2.
Remove the coloured insert from the
detergent dispenser and use it to open the
filter cover.
3.
Place a bowl beneath the filter.
4.
Turn the filter slowly anti-clockwise until the
grip is vertical; do not extract filter as yet.
5.
Wait until all the water has drained out.
6.
Now unscrew the filter completely and extract
it.
7.
Remove any foreign material from the filter.
8.
Make sure the pump impeller is not
obstructed.
9.
Insert the filter and screw it fully down in a
clockwise direction (until the grip is
horizontal).
10.
Close the cover.
11.
Pour 0.5 l of water into the detergent
dispenser to reactivate the “Eco System”.
12.
Connect the appliance to the electrical outlet.
13.
Select a programme and start it.
REMOVING THE FILTER
