Fuel Pressure Sensor G247 , removin
and installin
S
ecial tools, testers and auxiliar
items re
uired
Assembly tool T10118
Socket wrench insert 27 mm VAS 5301/7
- Disconnect water pipe and oil dipstick guide from intake
manifold
- arrows -
and pull off oil dipstick guide upward
from engine.
- Disengage connector from Fuel Pressure Sensor G247
using assembly tool T10118 .
Warning!
Fuel pressure in high pressure line can be up to
120 bar! Wear protective goggles and protective
clothing to prevent injuries and contact with
skin. Before loosening Fuel Pressure Sensor
G247 , place a rag around the connection point.
Then release pressure by carefully loosening.
- Remove Fuel Pressure Sensor G247 using socket
wrench insert 27 mm VAS 5301/7 .
Ст
. 17 из 23Fuel in
ection s
stem
