- Remove intake manifold support
- arrows -
and
disconnect connector
- 1 -
from Fuel Pressure Sensor
G247 .
- Remove all bolts from intake manifold.
- Carefully pull off intake manifold with fuel rail from
cylinder head.
Installin
- Installation is performed in reverse order of removal.
Tightening torque Nm
Mounting bolts for intake manifold
10
Bolt for intake manifold support
23
Nut for intake manifold support
10
Fuel supply line to high pressure pump
25
Fuel return line to high pressure pump (replace)
17
Bolts for Intake Flap Motor
V157
7
Removing and installing fuel rail
Note:
Intake manifold must be removed, removing 24-1,
Intake manifold, removing and installing .
- Remove hoses from EVAP canister.
Ст
. 15 из 23Fuel in
ection s
stem
