English - 33
TROUBLESHOOTING
Problem Checkpoints Action
Water is not supplied.
Check if water is supplied after
pressing the Start/Pause button.
Water won't supply unless
pressing the Start/Pause button
again. Press the Start/Pause
button.
Check if the water tap is closed. Open the tap.
Check if the filter at the
connection of water supply hose
is blocked.
Clean the filter net using a
toothbrush.
Check if water supply cut-o
occurred.
If the water supply is cut o, close
the water tap and turn o the
washing machine.
The water leaks at
the water supply hose
connector.
If the tap connecting part is loose,
water may leak.
Repeat the assembling steps
again.
(Refer to “Step 2 - Connect the
water supply hose” on page 11)
Check if the rubber ring of the
water supply hose is in the right
position.
Fit it tightly again.
Check if the water supply hose is
twisted.
Straighten the hose.
If the water supply is too strong,
water may leak.
Fine tune the water supply of the
tap.
Check if the water leaking is from
the tap itself.
Fix the tap.
There are loud noises
and vibrations when
spinning.
Check if the laundry is spread out
evenly in the washing machine.
Spread out the laundry evenly and
start again.
Check if the washing machine
is balanced and on a sturdy, flat
surface.
Ensure that the washing machine
is leveled.
Ensure that the washing
machine is not surrounded with
unnecessary items.
Move anything unnecessary away
from the washing machine.
Untitled-1 33 2014-11-26 4:21:21
