Caution when inserting the drain hose
1. When extending the hose to another hose, the length
should not exceed more than 118.1 in (3 m).
2. Ensure that the end of the drain hose is lower than the
water level for the water to drain properly.
3. The drain hose should not have any obstacles higher than
2 in (5 cm) in their path.
4. Don’t install the drain hose underneath the washer.
For pump-drained washers
1. Remove the cap-hose and connect the outlet-hose.
2. Ensure that the drain hose is connected tightly to the drain-
outlet on the side of the washer.
3. Install the drain hose about 35~39 in (90~100 cm) above
the ground.
setting up your washer
cap-hose
35~39 in
(90~100 cm)
Less than
118.1 in (3 m)
Less than
118.1 in (3 m)
Less than
2 in (5 cm)
CAUTION
