Productos de la Marca Leica-biosystems

Instructions for Use V 1.9 RevD – 05/2013

Pressing CLEAN for a longer period of time (minimum 3 seconds)

While a print job is in progress:

• Theprintjobisinterrupted.Printerswitchestoofflinemode."00" will

appear in the display for about 2 s.

• Aprintheadcleanisperformedandsubsequentlyatestprintiscarried

out on the cassette currently being processed. The printer then remains

in offline mode to enable the user to verify the print quality before resum-

ing the current print job.

If necessary, an additional clean can be performed.

• Toresumeprinting,pressONLINE to return to online mode.

• Theprintjobisresumedwherepreviouslyleftoff.

If no print job is in progress:

• Theprinterswitchestoofflinemode.

• Allstepsareperformedasdescribedabove.

5. Operation

Pressing the CLEAN button briefly and then releasing it starts a print

head clean (indicated by "00" being displayed). The total duration of

the cleaning procedure can be extended to 10 seconds, if CLEAN is

pressed once more as soon as "00" is displayed. Hold CLEAN for as

long you wish to continue cleaning (max. duration = 10 sec).

When operating continuously, the printer pauses regularly for inter-

mediate print head cleans. Printing is interrupted for approximately

10 seconds, after which time the instrument automatically resumes

operation.

CLEAN Cleaning the print head and carrying out a print test

Pressing CLEAN briefly

While a print job is in progress:

• Theprintjobisinterrupted."00" will appear on the display for about 2 s.

• Aprintheadcleaniscarriedoutandsubsequentlytheprintjobisre-

sumed.

If no print job is in progress:

• Theprintheadiscleanedimmediatelyafter"00" has been displayed