Productos de la Marca Leica-biosystems

Instructions for Use V 1.9 RevD – 05/2013

POWER Switching from POWER ON to STANDBY mode and back

LED illuminated – POWER ON mode

• Powerissuppliedtoallprintersystems.

• Theflashpowersupplyiscontinuouslybeingrecharged.

• Theprinterisreadytoprintimmediately.

LED flashes – STANDBY mode

• Allpowerabsorbersoftheprinterareswitchedoff,withtheexception

of those related directly to the processor (power saving mode).

• Theprintercleansaprintheadatregularintervals(e.g.4timesaday).

For that purpose it switches into POWER ON mode for a short period of

time.

LED off – Printer disconnected from power supply

POWER

LOADED

To confirm a magazine exchange

Pressing LOADED briefly:

Informs the printer that an empty magazine has been refilled and put back

into place. (Or that a magazine has been removed and replaced by another

one containing cassettes of a different color).

Pressing and holding LOADED for approx. 10 sec. in offline mode:

Informs the printer that a cartridge has been exchanged.

(For more information, see Chapter 4.9, "Exchanging the cartridge").

5. Operation

Printing is possible in POWER ON mode only.

To activate POWER ON with the printer being in STANDBY mode,

press POWER. POWER ON will be activated via the PC interface.

If no print job is received within a certain period of time, the print-

er automatically switches over to STANDBY mode. After switching

from STANDBY mode to POWER ON mode, there will be a reduced

print throughput until all systems have reached their proper operat-

ing temperature.