Network Configuration
4
AU-211P 54
- Press Fix
The folllowing settings are optional an will be determined by the
customer environment, the Installation Survey & Checklist and the Ping
Confirmation Test which is performed during the network configuration
process.
- Bit Assignement 00011100 Enable PrincipleName, FQDN & LDAP w/SSL
- Press Fix
Scan to Me/Scan to Home
If the customer requires Scan to Me/Scan to Home the following soft switch
will have to be enbled. Please reference the Installation Survey & Checklist
- Enter Service Mode
- Enter System 2-> Soft Switch Settings
- Switch No. 26
- HEX Assignment 10 (to enable)
- HEX Assignment 00 (to disable) *Default
- Press Fix
bizhub 501 series
Network Environment Settings
The following soft switch setting is manditory
- Enter Service Mode
- Enter System 2-> Soft Switch Settings
- Switch No. 44
- Bit 2 = ON Enable PrincipleName ‘
user
@mil’
- Press Set
- Bit 3 = ON Enable FQDN
- Press Set
The folllowing settings are optional an will be determined by the
customer environment, the Installation Survey & Checklist and the Ping
Confirmation Test which is performed during the network configuration
process.
- Bit 1 = Enable LDAP w/SSL
- Bit 5= Enable Scan to Me and Scan to Home
- Bit 6= Enable Scan to Me and SMB
