Network Configuration
4
AU-211P 70
4.2 Optional Operation Settings
When operating this system, the following settings can be disabled to ensure
a higher level of security if an administrator and/or department/agency
requires more security. These are optional settings.
Disabling PageScope Web Connection
Disabling PageScope Web Connection will restrict remote access to the
MFP. If this restriction is desired follow the steps below;
!
Detail
To disable PageScope Web Connection, press the [Utility/Counter] key,
and then [Administrator Settings] - [Network Settings] - [HTTP Server
Settings] on the MFP control panel, and set "PSWC Settings" to "OFF".
Disabling the OpenAPI function
To associate the MFP with PageScope Authentication Manager, register the
MFP in the initial setting of PageScope Authentication Manager, and disable
the OpenAPI function of the MFP in the disable state. However, the initial
setting results in the MFP administrator password being made public on the
network. To ensure security, change the administrator password as required
after the initial setting.
!
Detail
• To disable the OpenAPI function, press the [Utility/Counter] key, and then
[Administrator Settings] - [System Connection] - [OpenAPI Settings] on
the MFP control panel, and set "Access Setting" to "Restrict".
• To change the MFP administrator password, press the [Utility/Counter]
key, and then [Administrator Settings] - [Security Settings] -
[Administrator Password] on the MFP control panel.
Disabling TCP Socket, FTP server, and SNMPv3
To operate this system, disable the TCP Socket, FTP server, and SNMPv3 in
the disable state.
!
Detail
On the MFP that supports this system, the TCP Socket, FTP server, and
SNMPv3 functions are disable by default. For details on each setting,
refer to the User's Guide [Network Administrator] supplied together with
the MFP.
