Network Configuration
4
AU-211P 55
4.0.1 Configuring Network Settings
TCP/IP Settings
On the MFP control panel, press the [Utility/Counter] key, and then
[Administrator Settings] - [Network Settings] - [TCP/IP Settings].
The MFP is defaulted to DHCP ON this will automatically capture most of the
network settings. If the customer wants the MFP to utilize a static address
the DHCP functions will need to be turned OFF.
% Select ON to activate TCP/IP settings.
% Select either IPv4 or IPv6 (deactivate the auto obtain function if neces-
sary),
% Enter the IP Address, Subnet Mask and Default Gateway as they ap-
pear in the Installation Survey & Checklist.
% Close this window, you will be asked to restart the MFP.
IPv4 Settings
Item Description
IP Application Method Select whether to automatically retrieve the IP address
or directly specify it.
IP Application Method
Auto Setting
When automatically retrieving the IP address, select the
automatic retrieval method.
IP Address When directly specifying the IP address, enter the IP
address of the MFP.
Subnet Mask When directly entering the IP address, specify the
subnet mask for the connected network.
Default Gateway When directly entering the IP address, specify the
default gateway for the connected network.
