6
Maintaining the Cutter
To ensure trouble free operation, the Cutter should be cleaned (using the items listed below) after printing
each roll of labels, and more often if the cutting action becomes sluggish.
Recommended Cleaning Items
Isopropyl alcohol
Cotton swabs
Compressed air or soft-bristle brush
CAUTION
Remove power before performing maintenance.
Cutter Blades are SHARP. Keep body parts away from the cutting surfaces.
Never use metal objects on the cutting surfaces.
Take proper precautions when using isopropyl alcohol, a flammable liquid.
Follow these steps to clean the Cutter:
1) Turn OFF the Power Switch and unplug
the power cord from the AC Receptacle.
AC Receptacle
Power Switch
2) Remove media from the printer. Open
the Cutter Assembly, disconnect the
Cutter Cable from the Hinge Plate
Jack, and then remove the Cutter
Assembly from the Hinge Plate.
Cutter
Cable
Hinge Plate
Jack
Cutter
Assembly
