Corporate Office: P.O. Box 21121, Eugene, OR 97402
oregonfuelinjection.com
EUGENE MEDFORD
8. Install drive gear-to-pump hub cap screws (B) and tighten to 47 N'm (35 Ib-ft).
9. Remove JDG886 Injection Pump Timing Pin (A) from injection pump hub.
10. Install injection pump drive gear cover using a new O-ring, if needed. Tighten
cap screws to 27 N'm (20 Ib-ft).
11. Connect fuel delivery lines. Tighten line nuts to 27 N'm (20 Ib-ft).
IMPORTANT: DO NOT move delivery valve fittings while tightening line nuts. If
delivery valve and barrel housing rotates while tightening a fuel line nut, the rack
may bind inside the injection pump and regulation or fuel delivery may be altered.
4036 West 1
st
Ave.
Eugene, OR 97402
(541) 485-1434 • 1-800-452-5055
2221 Tower East Dr
Medford, OR 97504
(541) 773-8669 • 1-800-648-8848
10/10/12
